SPR Smartphone Repair
WhatsApp

iPad Back Housing & Frame Repair.

iPad frame bent from being sat on, or the back housing dented and cracked? SPR straightens bent frames with controlled pressure and replaces rear aluminium housing on Pro models where the part is available. Walk in or WhatsApp us a photo for a free quote.

✓ Same-day turnaround✓ 6-month warranty✓ 16 branches, no appointment
SPR technician at the repair workbenchON-BENCH REPAIR · 16 BRANCHES
Frame & housing damage

Five signs of frame or housing damage.

A bent frame can look like a screen problem, and housing damage often hides a second issue underneath. These are the patterns we check for before quoting.

SLIDE →
1/5
1
Frame visibly bent or warpedUsually from being sat on, dropped, or carried loose in a bag.
2/5
2
Screen lifting because the frame is bentThe bent frame no longer holds the display flat, so it lifts or pops out at one edge.
3/5
3
Dents or a cracked rear housingDents, deep scratches or a cracked rear aluminium housing, especially on iPad Pro.
4/5
4
Won't sit flat, or buttons misalignedThe iPad rocks instead of sitting flat, or buttons and ports no longer line up after a bend.
5/5
5
New screen won't seat properlyA bent frame underneath is the reason a replacement screen won't stay down — not the screen itself.

A bent or warped iPad frame is usually from being sat on, dropped, or carried loose in a bag — and it's a common reason a screen lifts at the edge or a replacement screen won't stay seated. SPR straightens the frame with controlled pressure so the display and components sit flat again. Heavily dented, crushed or cracked rear housings are replaced where a part is available; on unibody iPad Pro the rear aluminium also carries the antennas and mounts, so a housing swap means transferring the internals across, which is more involved than a base iPad. Housing damage often comes with a cracked screen or a swollen battery underneath, so we check for those at the same time and quote the whole job honestly. Some severe bends that have stressed the laminated display or the board can't be fully restored — we tell you straight after inspection what's realistic, and the diagnosis is free.

Back Housing · what it looks like
  • The frame is visibly bent or warped — usually from being sat on, dropped, or carried loose in a bag.
  • The screen is lifting or popping out at one edge because the bent frame no longer holds it flat.
  • Dents, deep scratches or a cracked rear aluminium housing, especially on iPad Pro.
  • The iPad won't sit flat and rocks, or buttons / ports no longer line up after a bend.
  • A new screen won't seat properly — a bent frame underneath is the reason, not the screen.
What we check first
  • Lay it on a flat surface and check for rocking or a raised corner — confirms a bent frame.
  • Check whether the screen is lifting at an edge — a bent frame is a common reason a screen won't stay seated.
  • Note where the damage is — a localised bend can be straightened; a crushed or cracked housing may need replacing.
  • Identify the model — rear housing replacement is far more involved on unibody iPad Pro than straightening a base iPad's frame.
Repair path

Workshop-level, typically 2–4 hours. For a bent or warped frame we carefully straighten it with controlled pressure so the display and components seat flat again — important, because a bent frame is a common reason a screen lifts or a replacement screen won't stay down. Heavily dented, crushed or cracked rear housings are replaced where a part is available; on unibody iPad Pro the rear aluminium also carries the antennas and mounts, so a housing swap means transferring the internals, which is more involved than a base iPad. Housing damage often comes with a cracked screen or a swollen battery underneath, so we check for those at the same time and quote the whole job honestly. Some severe bends that have stressed the laminated display or the board can't be fully restored — we tell you straight after inspection what's realistic, and the diagnosis is free.

Send these on WhatsApp for the fastest quote
  • Exact iPad model.
  • Whether the frame is bent / warped, dented, or the housing is cracked.
  • Whether the screen is lifting or already cracked too.
  • What caused it (sat on, dropped) and whether it still powers on.

Four steps. Zero hassle.

1 · WHATSAPP
📷 photo-of-issue.jpgHi — my device has this issue, can you take a look? 😩
Sure 👍 free check first, then we'll confirm the fix + timing. Which area are you in?
Message us on WhatsAppSend your model and a photo of the issue. A technician replies fast.
2 · WALK INSPR Kepong branch storefront
Walk into any branch16 workshops, no appointment — parts usually in stock.
3 · THE BENCHSPR technicians working on phone repairs at the workshop bench
Swapped on an ESD-safe benchBoard protected, anti-static mat — watch it happen.
4 · HANDOVERSPR smartphone repair team
Tested, then take it home2–4 hr, with a 6-month warranty.
Illustration — not an actual customer conversation

ESD-safe benches. Every branch.

SPR branch technician at the repair counterStereo microscope · QCESD-safe matTested before handover15-SEC BENCH CLIP · PLACEHOLDER

Every repair happens on grounded anti-static workstations with calibrated tools and microscope inspection. 16 workshops, same setup.

Every iPad. Every generation.

Back Housing supported across every iPad generation — parts stocked at all 16 branches.

Pick your model

Tap a model — your WhatsApp message is pre-fillediPad Pro M5 Back Housing

Stocked at most branches · 2–4 hr at the bench · 6-month warranty.

WAHi SPR, I'd like a free quote. Issue: Back Housing Model: iPad Pro M5
Send it on WhatsApp
Questions

Before you walk in.

Q.01My iPad frame is bent and the screen is lifting — can you fix it?

Usually yes. A bent frame is the common reason a screen lifts at the edge or won't stay seated, and we straighten the frame with controlled pressure so the display sits flat again. Often the screen is cracked too from the same impact, so we check and quote both together. If the bend is severe enough to have damaged the laminated screen or the board, we'll tell you honestly what can and can't be restored.

Q.02Can you replace the back of an iPad Pro?

Where the part is available, yes, but it's an involved job — on unibody iPad Pro the rear aluminium housing carries the antennas and all the internal mounts, so replacing it means transferring the logic board, battery, cameras and flexes into the new housing. We assess whether a straighten-and-repair or a full housing swap is the better value for your model and tell you upfront.

Q.03I sat on my iPad and now it's bent — is it worth repairing?

Often, depending on the damage. A localised bend with the screen and board intact is straightenable and worth it. A severe crush that's cracked the laminated display, bent the board or swollen the battery is a bigger job, and on an older iPad we give you the honest cost-vs-replace comparison free. Bring it in and we'll assess the frame, screen, battery and board together before quoting.

Q.04Where can I get ipad back housing & frame repair near me in KL or Selangor?

SPR has 16 walk-in branches across Kuala Lumpur and Selangor — Kepong, Uptown Damansara, Puchong Kenari, Sri Petaling, Taman Segar, Setapak, Mahkota Cheras, Pandan Indah, Ampang, Mid Valley, IOI City Mall, Sungai Wang, Maluri, Equine Park, Taipan USJ, and Kuchai Lama. Walk into any branch — no appointment needed — or WhatsApp us a photo of your iPad first to confirm parts at the branch nearest you.

Q.05How long does ipad back housing & frame repair take?

Typically 2–4 hr at any of our 16 branches. Walk in without an appointment, or WhatsApp us your model to confirm stock first.

Q.06Which iPad models are covered?

Every iPad — iPad Pro (all generations, 11 and 12.9 inch), iPad Air 1–5, iPad Mini 1–6, and standard iPad 1–10. M-series models included.

Q.07What does ipad back housing & frame repair cost in Malaysia?

Cost depends on the iPad model and the parts tier you choose. We don't post fixed prices because every case is different. WhatsApp us a photo of the damage and the model and we send a free quote within minutes. No charge for diagnosis if you walk in.

Q.08Is SPR an Apple Authorised Service Provider?

No — SPR is independent. We're not Apple, not an Apple Authorised Service Provider, and we don't claim to be. We've been repairing Apple devices for 17 years across 16 branches in KL and Selangor. If you specifically want Apple-genuine parts and an Apple-issued service record, your only option is Apple's own out-of-warranty service. If you want fast same-day independent repair with a 6-month warranty at independent shop pricing, that's us.

Q.09What warranty do I get?

Every back housing at SPR comes with a 6-month warranty on parts and labour, honoured at all 16 branches across KL and Selangor — bring it to any SPR location for warranty work, not just the branch where the repair was done. Water-damage repairs carry a shorter warranty due to the unpredictable progression of corrosion.

Q.10What kind of replacement parts do you use?

OEM-grade parts as standard — manufactured to the same specifications as the originals. Premium-grade options are available on request for most models. We show you both tiers upfront so you can choose what fits. Apple does not sell parts to repair shops, so no independent shop in Malaysia can offer Apple-genuine parts; anyone claiming so is misleading.

Q.11Do you offer a free diagnosis?

Yes. Free diagnosis on walk-in at every branch. If we cannot repair your device, you pay nothing — no diagnostic fee, no consultation charge. Many fixes (lint cleaning, ultrasonic cleaning, software-only) cost nothing if that's all that's needed.

iPad Back Housing & Frame Repair. Walk in. Same day.

Back Housing at any of 16 SPR branches across KL & Selangor. WhatsApp us a photo and we'll confirm stock + quote in minutes.

WhatsApp+60 18-3944 559
Phone broken?
Free WhatsApp quote · No fix, no fee
WhatsApp