KL & Selangor · 16 branchesKL & Selangor · 16 branchesCracked front glass or a black, lined OLED on your Apple Watch? SPR replaces the full display assembly — sapphire glass, Always-On OLED, digitiser, Force Touch and ambient sensor sealed as one unit — in 2 to 4 hours for Series and SE models, 4 to 6 hours for Ultra. Re-sealed with OEM-spec adhesive, pressure-tested where possible.
ON-BENCH REPAIR · 16 BRANCHESWe test Force Touch and digitiser response, and check the case bottom for a swollen battery before quoting — here's what usually brings people in.
Apple Watch displays are a single bonded assembly, not separate layers — sapphire or Ion-X glass, the Always-On OLED, digitiser, Force Touch sensor (on older models) and ambient light sensor sealed together as one unit. Unlike iPhone, there's no front-glass-only swap; a cracked front and a damaged OLED both mean the same full assembly replacement. SPR lifts the display with heat-controlled disassembly to protect the digitiser cable and sensor cluster underneath, fits an OEM-grade replacement assembly, and re-seals with OEM-spec adhesive, pressure-testing where possible. Series and SE models are counter-level work at 2–4 hours; Ultra 1 and Ultra 2 take 4–6 hours because the titanium bezel and sapphire front need careful disassembly to preserve the water-resistance gaskets and keep the Action Button intact. If the OLED has been compressed against a swollen battery and the chassis frame is bent, replacing the watch is sometimes the more cost-effective call — we give that comparison honestly during free diagnosis.
Counter-level: 2–4 hours for most Series and SE models. Apple Watch screens are bonded with strong adhesive; we use heat-controlled disassembly to lift the display without damaging the digitiser cable, Force Touch flex (older models), or ambient sensor cluster. Re-seal with OEM-spec adhesive and pressure-test where possible. Workshop-level (Kepong HQ): Ultra 1 and Ultra 2 take longer (4–6 hours) because the titanium bezel and sapphire front require careful disassembly to preserve water-resistance gaskets, and the Action Button and dive-mode sensor cluster need handling. Not recoverable: a watch where the OLED has been compressed against a swollen battery and the chassis frame is bent is often more cost-effective to consider replacement; we give you the honest comparison free during diagnosis.
Screen Replacement supported across every Apple Watch generation — parts stocked at all 16 branches.
Stocked at most branches · 2–4 hr at the bench · 6-month warranty.
Walk in any day — same warranty, same QC at every shop.
We re-seal with OEM-spec adhesive and pressure-test where possible, but water resistance can never be guaranteed to original factory rating on any Apple Watch that has been opened. Avoid swimming with a repaired watch as a best practice — Apple's own service centres carry the same caveat.
No — Apple Watch displays are a fully bonded assembly (sapphire / Ion-X glass + OLED + digitiser + ambient sensor as one unit). Unlike iPhone, you cannot replace just the front glass. We replace the full screen assembly with an OEM-grade unit.
Ultra 1 and Ultra 2 are similar in principle but more complex in practice — the titanium bezel and sapphire front require careful disassembly to preserve the deep-pressure water-resistance gaskets, and the Action Button stays in place during the work. Turnaround is typically 4–6 hours rather than 2–4. WhatsApp first to confirm Ultra parts at the branch nearest you.
SPR has 16 walk-in branches across Kuala Lumpur and Selangor — Kepong, Uptown Damansara, Puchong Kenari, Sri Petaling, Taman Segar, Setapak, Mahkota Cheras, Pandan Indah, Ampang, Mid Valley, IOI City Mall, Sungai Wang, Maluri, Equine Park, Taipan USJ, and Kuchai Lama. Walk into any branch — no appointment needed — or WhatsApp us a photo of your Apple Watch first to confirm parts at the branch nearest you.
Typically 2–4 hr at any of our 16 branches. Walk in without an appointment, or WhatsApp us your model to confirm stock first.
Every Apple Watch: Series 3 through 9, Apple Watch SE 1 and 2, Apple Watch Ultra 1 and 2. Series 1 and 2 supported on parts-availability basis.
Cost depends on the Apple Watch model and the parts tier you choose. We don't post fixed prices because every case is different. WhatsApp us a photo of the damage and the model and we send a free quote within minutes. No charge for diagnosis if you walk in.
No — SPR is independent. We're not Apple, not an Apple Authorised Service Provider, and we don't claim to be. We've been repairing Apple devices for 17 years across 16 branches in KL and Selangor. If you specifically want Apple-genuine parts and an Apple-issued service record, your only option is Apple's own out-of-warranty service. If you want fast same-day independent repair with a 6-month warranty at independent shop pricing, that's us.
Every screen replacement at SPR comes with a 6-month warranty on parts and labour, honoured at all 16 branches across KL and Selangor — bring it to any SPR location for warranty work, not just the branch where the repair was done. Water-damage repairs carry a shorter warranty due to the unpredictable progression of corrosion.
OEM-grade parts as standard — manufactured to the same specifications as the originals. Premium-grade options are available on request for most models. We show you both tiers upfront so you can choose what fits. Apple does not sell parts to repair shops, so no independent shop in Malaysia can offer Apple-genuine parts; anyone claiming so is misleading.
Yes. Free diagnosis on walk-in at every branch. If we cannot repair your device, you pay nothing — no diagnostic fee, no consultation charge. Many fixes (lint cleaning, ultrasonic cleaning, software-only) cost nothing if that's all that's needed.
Screen Replacement at any of 16 SPR branches across KL & Selangor. WhatsApp us a photo and we'll confirm stock + quote in minutes.
